using different channels for rightvs left hand on piano

The place for beginner Finale users. ("How do I...")

Moderators: Peter Thomsen, miker

hermanding
Posts: 32
Joined: Fri Jun 08, 2007 2:09 am

Post by hermanding » Sun Sep 16, 2007 11:18 pm

i've asked about this before and Peter - your genius brain had answers. this is a little different. due to wanting different sound dynamics in each hand on the piano - when i was using the finale demo, Peter said i could do that by adding another instrument - the same piano in fact and choosing a different channel from its normal channel 1. then looking at the staves and changing staff 2 to the new channel - say channel 1 for treble and channel 2 for the bass in the piano. Which I did and which worked. of course this was in the demo and the instruments were the smart synthesizer.
now, with the real finale2008 and trying to use the GPO - i did all these same procedures for the steinway grand - adding second piano for channel 2, using right hand staff as steinway channe 1, and left hand as steinway channel 2. no matter what i do, the left hand does not playback. then i tried it with the synthesizer sounds - and it works.
is it NOT possible to do this on garritan? anybody got any ideas?
i'm open to all opinions.
thanks much
ding :D
ding


User avatar
Peter Thomsen
Posts: 6653
Joined: Fri Jul 25, 2003 6:47 pm
Finale Version: Finale v27.4
Operating System: Mac

Post by Peter Thomsen » Mon Sep 17, 2007 4:07 pm

Perhaps this thread can help you:

http://forum.makemusic.com/default.aspx?f=5&m=198623

Peter
Mac OS X 12.6.9 (Monterey), Finale user since 1996

hermanding
Posts: 32
Joined: Fri Jun 08, 2007 2:09 am

Post by hermanding » Mon Sep 17, 2007 5:01 pm

for the thread suggestion. will look at it and report back
ding :D
ding

Post Reply