I do I do it.
Moderators: Peter Thomsen, miker
- miker
- Posts: 6013
- Joined: Fri Mar 13, 2009 4:28 pm
- Finale Version: Finale 27.4
- Operating System: Mac
Pat, these are called "cross-staff" notes. You can do them either manually, or with the cross-staff plugin.
Please take the time to read the instructions, and try it out for yourself. If you still have questions afterwards, we'll try to help.
http://usermanuals-prod-finalemusic-com ... ross-staff
I didn't use the sextuplets, but you should get the idea.
Please take the time to read the instructions, and try it out for yourself. If you still have questions afterwards, we'll try to help.
http://usermanuals-prod-finalemusic-com ... ross-staff
I didn't use the sextuplets, but you should get the idea.
Finale 27 | SmartScorePro 64
Mac OS 13.2.1 Ventura
Copyist for Barbershop Harmony Society
Mac OS 13.2.1 Ventura
Copyist for Barbershop Harmony Society
Sorry I didn't answer your post. I did sextuplets as you asked but I did not use note mover. I found it faster to just the Up arrow instead then I did you the beam tool to make the beams look better. Here is what I got.
If it's for playback only, it would work. But if you're expecting people to actually play from the score, you need to use cross staffing. It may have been "faster" for you, but as a keyboardist, I'd be sitting there wondering what that was all about, then send it back to be done correctly.
- miker
- Posts: 6013
- Joined: Fri Mar 13, 2009 4:28 pm
- Finale Version: Finale 27.4
- Operating System: Mac
Your method, while fine for playback, leaves the ledger lines and does not reverse the noteheads. That's why Jetcopy and johnmouse suggested you redo it.
Finale 27 | SmartScorePro 64
Mac OS 13.2.1 Ventura
Copyist for Barbershop Harmony Society
Mac OS 13.2.1 Ventura
Copyist for Barbershop Harmony Society
- miker
- Posts: 6013
- Joined: Fri Mar 13, 2009 4:28 pm
- Finale Version: Finale 27.4
- Operating System: Mac
Pat,
If motet’s suggestion doesn’t work, contact me by private message. We’ll set up a Zoom, and I’ll try to help you.
If motet’s suggestion doesn’t work, contact me by private message. We’ll set up a Zoom, and I’ll try to help you.
Finale 27 | SmartScorePro 64
Mac OS 13.2.1 Ventura
Copyist for Barbershop Harmony Society
Mac OS 13.2.1 Ventura
Copyist for Barbershop Harmony Society
motet it was suppose to read "How do I do it" But some how the word "How" did not make it to the screen.
Does this look better. It took some research to figure out how to turn the notes back around.
Does this look better. It took some research to figure out how to turn the notes back around.
- miker
- Posts: 6013
- Joined: Fri Mar 13, 2009 4:28 pm
- Finale Version: Finale 27.4
- Operating System: Mac
Much better. The only thing wrong is the first three noteheads, upper clef, second measure. Those noteheads need to be reversed. Compare them to the other notes in the upper staff. I might also work on the angle of the beams
Finale 27 | SmartScorePro 64
Mac OS 13.2.1 Ventura
Copyist for Barbershop Harmony Society
Mac OS 13.2.1 Ventura
Copyist for Barbershop Harmony Society
OK done. There was a lot to change. But I am learning. One of my big problems is reading. After 3 or 4 paragraphs my mind starts to wonder then I have to go back and reread what I had read. Wasn't always like that. I was a mechanic Working on machinery in factories. I to read a lot of technical manuals. But as long as there are nice people in here who are willing to help I well keep trudging along.
I am sure that you hear lot of the same problems, but unlike some other forums that I used to go to all the time I never hear any one complain about all the dumb question that newbies ask. It is nice for a change.
Pat
I am sure that you hear lot of the same problems, but unlike some other forums that I used to go to all the time I never hear any one complain about all the dumb question that newbies ask. It is nice for a change.
Pat
- motet
- Posts: 8292
- Joined: Tue Dec 06, 2016 8:33 pm
- Finale Version: 2014.5,2011,2005,27
- Operating System: Windows
As I said above, there's a one-keystroke alternative. Select the notes you want on the upper staff using the Selection tool
then press Shift+Alt+up-arrow:
This invokes a plug-in that does it all. You do need to move the 6's manually in this case:
then press Shift+Alt+up-arrow:
This invokes a plug-in that does it all. You do need to move the 6's manually in this case:
- motet
- Posts: 8292
- Joined: Tue Dec 06, 2016 8:33 pm
- Finale Version: 2014.5,2011,2005,27
- Operating System: Windows
You can also open the dialog for the cross-staff plug-in from the Plug-ins menu. There, you have more options, such as setting a split point, which will move up or down only notes above or below the split point, which may be easier than manual highlighting if you have a lot of those arpeggios.