Default chord fonts
Moderators: Peter Thomsen, miker
-
- Posts: 146
- Joined: Tue Aug 29, 2006 9:29 am
- Finale Version: Finale v. 27.4.1.146
- Operating System: Mac
How do I get back to the default chord fonts, sufixes, and fretboards?
I opened a file made in a previous version and everything about the chords is messed up...
I opened a file made in a previous version and everything about the chords is messed up...
Mac mini M1 \ MacOS 14.4.1 \ Finale 27.4.1
- Djard
- Posts: 919
- Joined: Sat Nov 20, 2010 2:23 am
- Finale Version: Finale 26
- Operating System: Windows
1. Chord Tool (Cm7 icon) -> Chord (in text menu) -> point to "Chord Style" -> select "Standard."
2. Double-click where you want to add a chord -> from "Style" drop-down menu, choose "Seville" -> check box for "Fretboard." Below are the default settings. If these steps fail, you can upload a page and I will be happy to examine the issue for you.
2. Double-click where you want to add a chord -> from "Style" drop-down menu, choose "Seville" -> check box for "Fretboard." Below are the default settings. If these steps fail, you can upload a page and I will be happy to examine the issue for you.
- Djard
- Posts: 919
- Joined: Sat Nov 20, 2010 2:23 am
- Finale Version: Finale 26
- Operating System: Windows
I am not at my PC with Finale, but I can see the problem that is not difficult to correct. I will send you the steps tomorrow that will let you customize the spacing between the characters.
Once corrected, you will be able to save the Library file, without bloating it; so that the chords will be available in your next work.
Once corrected, you will be able to save the Library file, without bloating it; so that the chords will be available in your next work.
- Djard
- Posts: 919
- Joined: Sat Nov 20, 2010 2:23 am
- Finale Version: Finale 26
- Operating System: Windows
Here are two options, taken from a troubleshooting guide that I compiled, thanks to help at this forum (anyone is welcome to a copy).
1. Chord Tool -> double-click on fretboard diagram. If using names only, right-click on chord name handle -> Edit Chord Definition.
2. Click "Next" until "F" appears in the "Symbol" field -> increase the value in the "H" field (for instance, from 0.32292 to 0.33) -> Next -> OK -> OK.
OPTION
1. Selection Tool -> right-click on chord diagram -> Edit Chord Definition -> Edit (in "Suffix" section at bottom).
2. Click in "Symbol" field -> type in values for the horizontal and/or vertical spacing. Add a minus symbol to place the suffix
closer to the main chord name, otherwise click on "Next."
3. Type a smaller value in the "H" field to reduce space between the letters -> Next -> repeat last step, until finished.
4. Next -> OK -> OK. Move a scroll bar if the changes made are not visible. Repeat
steps to adjust if necessary.
The values below corrected Finale's excessive horizontal spacing for Dsus4.
u = 0.06597
s = 0.15625
4 = 0.21875
1. Chord Tool -> double-click on fretboard diagram. If using names only, right-click on chord name handle -> Edit Chord Definition.
2. Click "Next" until "F" appears in the "Symbol" field -> increase the value in the "H" field (for instance, from 0.32292 to 0.33) -> Next -> OK -> OK.
OPTION
1. Selection Tool -> right-click on chord diagram -> Edit Chord Definition -> Edit (in "Suffix" section at bottom).
2. Click in "Symbol" field -> type in values for the horizontal and/or vertical spacing. Add a minus symbol to place the suffix
closer to the main chord name, otherwise click on "Next."
3. Type a smaller value in the "H" field to reduce space between the letters -> Next -> repeat last step, until finished.
4. Next -> OK -> OK. Move a scroll bar if the changes made are not visible. Repeat
steps to adjust if necessary.
The values below corrected Finale's excessive horizontal spacing for Dsus4.
u = 0.06597
s = 0.15625
4 = 0.21875
- miker
- Posts: 6025
- Joined: Fri Mar 13, 2009 4:28 pm
- Finale Version: Finale 27.4
- Operating System: Mac
In your document options > fonts, what fonts are showing in the chord frame for all the components: Root, Alteration, and Suffix?
Finale 27 | SmartScorePro 64
Mac OS 13.2.1 Ventura
Copyist for Barbershop Harmony Society
Mac OS 13.2.1 Ventura
Copyist for Barbershop Harmony Society
-
- Posts: 146
- Joined: Tue Aug 29, 2006 9:29 am
- Finale Version: Finale v. 27.4.1.146
- Operating System: Mac
This is what it shows in the new file that opens that old file:
Symbol > Arial Narrow
Suffix* > Times (missing)
Alteration > ChordSym (missing)
Fretboard > Times (missing)
Mac mini M1 \ MacOS 14.4.1 \ Finale 27.4.1
- miker
- Posts: 6025
- Joined: Fri Mar 13, 2009 4:28 pm
- Finale Version: Finale 27.4
- Operating System: Mac
Those (missing) fonts are the reason you’re having the problem, I believe. Open a newer document or even a default. See if chords display correctly. If they do, check the fonts to see what they are. Duplicate those settings in the problem doc, and see if they are better.
Finale 27 | SmartScorePro 64
Mac OS 13.2.1 Ventura
Copyist for Barbershop Harmony Society
Mac OS 13.2.1 Ventura
Copyist for Barbershop Harmony Society
- Djard
- Posts: 919
- Joined: Sat Nov 20, 2010 2:23 am
- Finale Version: Finale 26
- Operating System: Windows
On a PC, one can open a word processor, like MS-Word and view the list of fonts installed in the OS, including those Finale uses. A less expedient way is to examine them in File Explorer, Windows' file manager. A Mac will have something similar. If a font has been corrupted or deleted, it can easily be replaced, either by a partial re-installation of the software or by downloading one, which are freely available on the Internet. I simply paste a *.TTF file to the system font folder, reboot, and it appears in every app that uses text fonts and such graphics.
-
- Posts: 15
- Joined: Sun Jun 22, 2014 5:24 pm
- Finale Version: Finale 27
- Operating System: Windows
Okay, I'm going to jump in here, because I'm mainly writing lead sheets, and would like the chords to be larger than the piddly default 12 point.
I've used the scaling change in the Doc Options and it mashes everything together like was shown earlier in the thread. I just learned about this edit thing shown farther up the line shortly before coming across this thread, and I'm finding it to be really cumbersome. On the spacing change: it's all just trial and error? Also, the font size doesn't want to change as easily as it might, even hitting "Apply". Biggest of all: It's necessary to doctor every chord this way? I'm not using complex chords here. I'm talking things like Gm7 and such, maybe the occasional diminished.
I've used the scaling change in the Doc Options and it mashes everything together like was shown earlier in the thread. I just learned about this edit thing shown farther up the line shortly before coming across this thread, and I'm finding it to be really cumbersome. On the spacing change: it's all just trial and error? Also, the font size doesn't want to change as easily as it might, even hitting "Apply". Biggest of all: It's necessary to doctor every chord this way? I'm not using complex chords here. I'm talking things like Gm7 and such, maybe the occasional diminished.
- Peter Thomsen
- Posts: 6646
- Joined: Fri Jul 25, 2003 6:47 pm
- Finale Version: Finale v27.4
- Operating System: Mac
You can change the size of the chord root directly, and this size is a document setting.Alan Knapper wrote: ↑Fri Mar 24, 2023 8:47 pmOkay, I'm going to jump in here, because I'm mainly writing lead sheets, and would like the chords to be larger than the piddly default 12 point …
For the chord suffixes, the fastes way is to load an already existing chord suffix Library with larger suffixes.
Finale comes with some ready made chord suffix Libraries, in different fonts.
No, not every chord, only every suffix.
When a suffix (e. g. m7) has been edited, then every occurrence if that suffix has the new size.
Mac OS X 12.6.9 (Monterey), Finale user since 1996
- miker
- Posts: 6025
- Joined: Fri Mar 13, 2009 4:28 pm
- Finale Version: Finale 27.4
- Operating System: Mac
I would suggest you use the plugin JW Change > Chords > Resize. Keep it to a maximum of about 20%. That should be enough for a “geezer lead sheet.”
Finale 27 | SmartScorePro 64
Mac OS 13.2.1 Ventura
Copyist for Barbershop Harmony Society
Mac OS 13.2.1 Ventura
Copyist for Barbershop Harmony Society
-
- Posts: 15
- Joined: Sun Jun 22, 2014 5:24 pm
- Finale Version: Finale 27
- Operating System: Windows
Thanks, but nothing happens when I do that.
Nothing happens when I go into Doc Options and change the font sizes either. I can change the symbol size, but no matter what I enter for any of the other variables, nothing happens, even when I do get the "apply" button to activate.
And as far as chord size: I'm looking at something around a 20 point (TNR) symbol with a slightly smaller suffix. Yeah, I want the dang things BIG.
The only thing that's actually worked is Doc Opt to "chords" then blew them up about 160% or so. But then I run into the spacing issue the OP brought up further up the thread.
Nothing happens when I go into Doc Options and change the font sizes either. I can change the symbol size, but no matter what I enter for any of the other variables, nothing happens, even when I do get the "apply" button to activate.
And as far as chord size: I'm looking at something around a 20 point (TNR) symbol with a slightly smaller suffix. Yeah, I want the dang things BIG.
The only thing that's actually worked is Doc Opt to "chords" then blew them up about 160% or so. But then I run into the spacing issue the OP brought up further up the thread.
-
- Posts: 15
- Joined: Sun Jun 22, 2014 5:24 pm
- Finale Version: Finale 27
- Operating System: Windows
And I may just not know what the heck I'm doing, but here's what I have currently.
The settings that I have in Document Options/Fonts are: TNR, symbol 24 pt, suffix 48 pt (not what I ultimately want, but I just wanted to see what would happen) I got an "apply" button, so I pressed it, but as you can see, the "apply" button isn't doing anything.
The settings that I have in Document Options/Fonts are: TNR, symbol 24 pt, suffix 48 pt (not what I ultimately want, but I just wanted to see what would happen) I got an "apply" button, so I pressed it, but as you can see, the "apply" button isn't doing anything.
- Peter Thomsen
- Posts: 6646
- Joined: Fri Jul 25, 2003 6:47 pm
- Finale Version: Finale v27.4
- Operating System: Mac
Alan Knapper wrote: ↑Tue Apr 04, 2023 10:28 pm… Nothing happens when I go into Doc Options and change the font sizes …
You are trying to use the Document Options to change the font size in the chord suffixes - right?Alan Knapper wrote: ↑Tue Apr 04, 2023 10:28 pm… The settings that I have in Document Options/Fonts are: TNR, symbol 24 pt, suffix 48 pt (not what I ultimately want, but I just wanted to see what would happen) I got an "apply" button, so I pressed it, but as you can see, the "apply" button isn't doing anything …
If you look closely in {Document Options - Fonts}, then you will see that there is an * after the word ‘Suffix’:
Suffix*
In a note below it is explained that for items with * a font change will only affect new items created after the font change.
Already existing items will not be affected.
In Other Words:
You can not use {Document Options - Fonts} to change fonts in already existing suffixes.
Mac OS X 12.6.9 (Monterey), Finale user since 1996
- michelp
- Posts: 2062
- Joined: Fri Jul 25, 2003 3:35 pm
- Finale Version: 27.4.1,26.3.1, Mont.
- Operating System: Mac
P.S. : to change the size of the alteration associated with the root : Document Options -> Fonts -> Chords -> Alteration.
Michel
MacOsX 12.7.4, Finale 27.4.1 & 26.3.1, Mac Mini Intel Dual Core i7 3Ghz, 16 Go Ram. Azerty kb. MOTU Midi Express XT USB, Roland Sound Canvas SC-88vl, MOTU Audio Express. 2 monitors (27"' pivot, 24'"), JW Lua, RGP Lua
MacOsX 12.7.4, Finale 27.4.1 & 26.3.1, Mac Mini Intel Dual Core i7 3Ghz, 16 Go Ram. Azerty kb. MOTU Midi Express XT USB, Roland Sound Canvas SC-88vl, MOTU Audio Express. 2 monitors (27"' pivot, 24'"), JW Lua, RGP Lua
-
- Posts: 15
- Joined: Sun Jun 22, 2014 5:24 pm
- Finale Version: Finale 27
- Operating System: Windows
I guess I don't understand what you're saying. Are you telling me that there's NO way to enlarge the suffixes that are already loaded? Doesn't that seem really limiting? Why is this so hard to accomplish?
Yes, I'm getting frustrated...
This picture shows what I end up with, changing the font before typing anything, to symbol: 22 pt, suffix: 48 pt. The suffix, being standard, is a fixed size, coming from an existing library, from what it sounds like you're telling me.
This shows what I get when I change that suffix size down to where I want it (18 pt), then click the chord button and then click on the chord itself. THAT shows what I want it to look like on the page. When I click anywhere else on the page, the higlight and the enlarged suffix goes away. Will it print the way I'm aiming for, even if it doesn't show like that on the screen? Previous experience tells me that what's on the screen is what's going to end up on the page.
I may just be being obtuse here, but in my mind, it should be simple. It's turning out to be anything but... The possibilty of not having to use simple text for chords is one of the reasons I upgraded from PrintMusic in the first place...
And some of this may be terminology. What even is "alteration?" I get Symbol and Suffix, but I don't understand what "alteration" is. Nothing happens when I change it, but what is that? I know just enough to be dangerous on chords, so that may be part of my problem. Still...
Yes, I'm getting frustrated...
This picture shows what I end up with, changing the font before typing anything, to symbol: 22 pt, suffix: 48 pt. The suffix, being standard, is a fixed size, coming from an existing library, from what it sounds like you're telling me.
This shows what I get when I change that suffix size down to where I want it (18 pt), then click the chord button and then click on the chord itself. THAT shows what I want it to look like on the page. When I click anywhere else on the page, the higlight and the enlarged suffix goes away. Will it print the way I'm aiming for, even if it doesn't show like that on the screen? Previous experience tells me that what's on the screen is what's going to end up on the page.
I may just be being obtuse here, but in my mind, it should be simple. It's turning out to be anything but... The possibilty of not having to use simple text for chords is one of the reasons I upgraded from PrintMusic in the first place...
And some of this may be terminology. What even is "alteration?" I get Symbol and Suffix, but I don't understand what "alteration" is. Nothing happens when I change it, but what is that? I know just enough to be dangerous on chords, so that may be part of my problem. Still...
- michelp
- Posts: 2062
- Joined: Fri Jul 25, 2003 3:35 pm
- Finale Version: 27.4.1,26.3.1, Mont.
- Operating System: Mac
P.S. : you can also load a chord suffix library that is close to what you like, and edit each suffix (each of its component can be modified, have its own font, size, style and position). Sure, it will take you a couple of hours but you will not regret it. Then save the chord suffix library so you can load it into your documents and templates. Before you load it into a file, delete the existing suffixes, otherwise your library will be added under the existing one.
Michel
MacOsX 12.7.4, Finale 27.4.1 & 26.3.1, Mac Mini Intel Dual Core i7 3Ghz, 16 Go Ram. Azerty kb. MOTU Midi Express XT USB, Roland Sound Canvas SC-88vl, MOTU Audio Express. 2 monitors (27"' pivot, 24'"), JW Lua, RGP Lua
MacOsX 12.7.4, Finale 27.4.1 & 26.3.1, Mac Mini Intel Dual Core i7 3Ghz, 16 Go Ram. Azerty kb. MOTU Midi Express XT USB, Roland Sound Canvas SC-88vl, MOTU Audio Express. 2 monitors (27"' pivot, 24'"), JW Lua, RGP Lua
-
- Posts: 3
- Joined: Fri Aug 11, 2023 9:18 am
- Finale Version: 27
- Operating System: Mac
So there are no downloadable libraries for "large fonts" or something like that?
I spent a few hours nudging and really am dissappointed.
I spent a few hours nudging and really am dissappointed.
-
- Posts: 146
- Joined: Tue Aug 29, 2006 9:29 am
- Finale Version: Finale v. 27.4.1.146
- Operating System: Mac
FindReReDouble wrote: ↑Sat Sep 16, 2023 7:56 amSo there are no downloadable libraries for "large fonts" or something like that?
I spent a few hours nudging and really am dissappointed.
"Arial Chord Suffix Library"
in
https://www.conqueringfinale.com/spotlight-on-plug-ins
Mac mini M1 \ MacOS 14.4.1 \ Finale 27.4.1