Connecting the stems of the notes even if punctuated by paus
Moderators: Peter Thomsen, miker
How do I connect with the final 2010 in the stems of the notes even if punctuated by pauses?
Mean, in the case of semiquavers, have one of the two line common to all the notes and the second dedicated line to the note itself and in the middle of the pauses.
... I hope it is clear
Thanks in advance
Mean, in the case of semiquavers, have one of the two line common to all the notes and the second dedicated line to the note itself and in the middle of the pauses.
... I hope it is clear
Thanks in advance
- Peter Thomsen
- Posts: 6626
- Joined: Fri Jul 25, 2003 6:47 pm
- Finale Version: Finale v27.4
- Operating System: Mac
I am not sure I understand?
It sounds like you have a beam group of 16th notes with rests, and you want to extend the secondary beam across the rests.
See the screen shot.
Is that what you mean?
It sounds like you have a beam group of 16th notes with rests, and you want to extend the secondary beam across the rests.
See the screen shot.
Is that what you mean?
Mac OS X 12.6.9 (Monterey), Finale user since 1996
- Peter Thomsen
- Posts: 6626
- Joined: Fri Jul 25, 2003 6:47 pm
- Finale Version: Finale v27.4
- Operating System: Mac
1) To get the beaming in my example:
Document Options - Beams
Select the options "Extend Beams Over Rests" and "Extend Secondary Beams Over Rests".
2) To get the beaming in your example:
A. Do as in 1), but don't select "Extend Secondary Beams Over Rests".
Now the beaming looks like this: B. To break the secondary beam between the first two notes, switch to the Special Tools Tool, and click the sub-tool Secondary Beam Break Tool.
Click inside the staff/measure to make handles appear on the 16th notes.
To break the secondary beam between the first two notes, double-click the handle on the rightmost note of the two.
Select "Break Through" "16th", and click OK.
Now the beaming looks like this:
Document Options - Beams
Select the options "Extend Beams Over Rests" and "Extend Secondary Beams Over Rests".
2) To get the beaming in your example:
A. Do as in 1), but don't select "Extend Secondary Beams Over Rests".
Now the beaming looks like this: B. To break the secondary beam between the first two notes, switch to the Special Tools Tool, and click the sub-tool Secondary Beam Break Tool.
Click inside the staff/measure to make handles appear on the 16th notes.
To break the secondary beam between the first two notes, double-click the handle on the rightmost note of the two.
Select "Break Through" "16th", and click OK.
Now the beaming looks like this:
Mac OS X 12.6.9 (Monterey), Finale user since 1996
Ok, I tried and I enclose the best result I got: (
I would add a ban premise, I just need some points in the score and I wish you could do something that crosses multiple bars and movements of the same
Thanks
I would add a ban premise, I just need some points in the score and I wish you could do something that crosses multiple bars and movements of the same
Thanks
- Attachments
-
- Test.png (33.22 KiB) Viewed 11365 times
I understand the problem, in the suggested configuration
I can not change the length of the stems of sixteenth notes: (
Peter Thomsen wrote: Document Options - Beams
Select the options "Extend Beams Over Rests" and "Extend Secondary Beams Over Rests".
I can not change the length of the stems of sixteenth notes: (
- Peter Thomsen
- Posts: 6626
- Joined: Fri Jul 25, 2003 6:47 pm
- Finale Version: Finale v27.4
- Operating System: Mac
Take a look at the attached Finale 2010 .mus document.Frank wrote:I understand how to do, I do not work merely a tool to change the length of the stems is to create more geometric and linear designs.
Is that what you mean by your words "more geometric and linear"?
You can adjust the stem length of beamed notes via
Special Tools Tool > Beam Angle Tool
Mac OS X 12.6.9 (Monterey), Finale user since 1996
- miker
- Posts: 6013
- Joined: Fri Mar 13, 2009 4:28 pm
- Finale Version: Finale 27.4
- Operating System: Mac
Go to the Finale Knowledge Base http://makemusic.custhelp.com/app/answers/list and do a search for Beam Over Barlines.
Finale 27 | SmartScorePro 64
Mac OS 13.2.1 Ventura
Copyist for Barbershop Harmony Society
Mac OS 13.2.1 Ventura
Copyist for Barbershop Harmony Society
- Peter Thomsen
- Posts: 6626
- Joined: Fri Jul 25, 2003 6:47 pm
- Finale Version: Finale v27.4
- Operating System: Mac
Take a look at the attached Finale 2010 .mus document:
The tools I used, are two sub-tools in the Special Tools Tool:
Beam Extension Tool
and
Broken Beam Tool (used to flip the "beam stub")
The tools I used, are two sub-tools in the Special Tools Tool:
Beam Extension Tool
and
Broken Beam Tool (used to flip the "beam stub")
Mac OS X 12.6.9 (Monterey), Finale user since 1996
- Peter Thomsen
- Posts: 6626
- Joined: Fri Jul 25, 2003 6:47 pm
- Finale Version: Finale v27.4
- Operating System: Mac
Here is a way to do it:
1) Document Options - Beams.
Select the option "Extend Beams Over Rests".
De-select "Allow Rests To Float".
2) Join the beam between all the entries inside the same measure.
(Simple menu > Simple Edit Commands > Modify Entry > Break/Join Beam
3) Now the beams should be flat (= horizontal).
If they are not flat, make them flat.
You can make flat beams in several ways:
- Globally for the entire document, via Document Options - Beams: Beaming Style: Flatten All Beams
- Locally for all the measures in a staff, via the Staff Attributes
- Locally for a region in a staff, via a staff style
- Individually, via the Simple Entry Tool: Simple menu > Simple Edit Commands > Modify Entry > Flat Beam (or via the Speedy Entry Tool)
4) Use the Beam Extension Tool to extend the beams to the barline - and a little longer so that there is an "overlap" between the two measures.
5) If necessary, use the Beam Angle Tool to adjust the stem length so that the overlapping beams have the same vertical position.
Tip: View the score at a high zoom percentage.
1) Document Options - Beams.
Select the option "Extend Beams Over Rests".
De-select "Allow Rests To Float".
2) Join the beam between all the entries inside the same measure.
(Simple menu > Simple Edit Commands > Modify Entry > Break/Join Beam
3) Now the beams should be flat (= horizontal).
If they are not flat, make them flat.
You can make flat beams in several ways:
- Globally for the entire document, via Document Options - Beams: Beaming Style: Flatten All Beams
- Locally for all the measures in a staff, via the Staff Attributes
- Locally for a region in a staff, via a staff style
- Individually, via the Simple Entry Tool: Simple menu > Simple Edit Commands > Modify Entry > Flat Beam (or via the Speedy Entry Tool)
4) Use the Beam Extension Tool to extend the beams to the barline - and a little longer so that there is an "overlap" between the two measures.
5) If necessary, use the Beam Angle Tool to adjust the stem length so that the overlapping beams have the same vertical position.
Tip: View the score at a high zoom percentage.
Mac OS X 12.6.9 (Monterey), Finale user since 1996