Swing to Straight 8ths problem (help!)

Discuss playback problems, including VST, Garritan, MIDI, etc.

Moderators: Peter Thomsen, miker

Post Reply
AbhiBass96
Posts: 2
Joined: Sun Apr 04, 2021 5:21 pm
Finale Version: 25.5.0.259
Operating System: Mac

Post by AbhiBass96 » Sun Apr 04, 2021 5:30 pm

Greetings everyone! I have been having a severe problem and I have scoured the forums for help only for me to finally sign up and ask this myself.

I have multiple instruments that are required to playback an 8th-note swing feel. However, a simple expression mark from the expression tool > tempo alteration doesn't help at all. In fact, it doesn't even give me the playback required unless I manually change the Human Playback Style from standard to jazz. That would be fine if I need the entire piece to be in swing but I need a section or a bar to be in 8th-note straight feel. I am having an extremely difficult time achieving this. Here are some pictures: https://imgur.com/skuwHLE & https://imgur.com/WLJLezc

I could use help, please!


User avatar
motet
Posts: 8225
Joined: Tue Dec 06, 2016 8:33 pm
Finale Version: 2014.5,2011,2005,27
Operating System: Windows

Post by motet » Sun Apr 04, 2021 6:15 pm

Swing should be independent of HP and works even when HP = none. To turn off swing, use a tempo expression with this playback:
Attachments
0827.png
0827.png (9.74 KiB) Viewed 5826 times

User avatar
zuill
Posts: 4418
Joined: Sat Dec 10, 2016 9:35 pm
Finale Version: Finale 2011-v26.3.1
Operating System: Windows

Post by zuill » Sun Apr 04, 2021 6:18 pm

Because of the known bug, the Score List needs to have all the parts checked to get swing (or straight after swing) on all staves in a score. In a part, swing works without the workaround, but not in then score.

Zuill
Windows 10, Finale 2011-v26.3.1
"When all is said and done, more is said than done."

AbhiBass96
Posts: 2
Joined: Sun Apr 04, 2021 5:21 pm
Finale Version: 25.5.0.259
Operating System: Mac

Post by AbhiBass96 » Sun Apr 04, 2021 9:54 pm

zuill wrote:
Sun Apr 04, 2021 6:18 pm
Because of the known bug, the Score List needs to have all the parts checked to get swing (or straight after swing) on all staves in a score. In a part, swing works without the workaround, but not in then score.

Zuill
Okay, I fixed half of it. I no longer have to fidget with the HPS and I have it on all staves at the beginning (all instruments), the swing is 100 and everything sounds good. Now, for my measure 19, I want it to be straight 8ths. Can you help me?

User avatar
motet
Posts: 8225
Joined: Tue Dec 06, 2016 8:33 pm
Finale Version: 2014.5,2011,2005,27
Operating System: Windows

Post by motet » Sun Apr 04, 2021 11:09 pm

To turn off swing, use a tempo expression with this playback:
Attachments
0827.png
0827.png (9.74 KiB) Viewed 5796 times

User avatar
miker
Posts: 5993
Joined: Fri Mar 13, 2009 4:28 pm
Finale Version: Finale 27.4
Operating System: Mac

Post by miker » Mon Apr 05, 2021 4:44 am

Again, I can’t imagine why that isn’t already there...
Finale 27 | SmartScorePro 64
Mac OS 13.2.1 Ventura
Copyist for Barbershop Harmony Society

User avatar
motet
Posts: 8225
Joined: Tue Dec 06, 2016 8:33 pm
Finale Version: 2014.5,2011,2005,27
Operating System: Windows

Post by motet » Mon Apr 05, 2021 5:40 am

Since the way to turn it off is pretty arcane, it should be!

User avatar
zuill
Posts: 4418
Joined: Sat Dec 10, 2016 9:35 pm
Finale Version: Finale 2011-v26.3.1
Operating System: Windows

Post by zuill » Mon Apr 05, 2021 3:46 pm

AbhiBass96 wrote:
Sun Apr 04, 2021 9:54 pm
zuill wrote:
Sun Apr 04, 2021 6:18 pm
Because of the known bug, the Score List needs to have all the parts checked to get swing (or straight after swing) on all staves in a score. In a part, swing works without the workaround, but not in then score.

Zuill
Okay, I fixed half of it. I no longer have to fidget with the HPS and I have it on all staves at the beginning (all instruments), the swing is 100 and everything sounds good. Now, for my measure 19, I want it to be straight 8ths. Can you help me?
If you would attach the file in question here, I'm sure someone can find the answer very quickly.

Zuill
Windows 10, Finale 2011-v26.3.1
"When all is said and done, more is said than done."

User avatar
miker
Posts: 5993
Joined: Fri Mar 13, 2009 4:28 pm
Finale Version: Finale 27.4
Operating System: Mac

Post by miker » Mon Apr 05, 2021 5:24 pm

motet wrote:
Mon Apr 05, 2021 5:40 am
Since the way to turn it off is pretty arcane, it should be!
It shouldn’t take them twenty minutes to add this as an expression, and send it out as an update. There is no excuse. And I’m not buying the Covid b.s. either, for as many years - decades, even - that this hasn’t been addressed.
Finale 27 | SmartScorePro 64
Mac OS 13.2.1 Ventura
Copyist for Barbershop Harmony Society

User avatar
zuill
Posts: 4418
Joined: Sat Dec 10, 2016 9:35 pm
Finale Version: Finale 2011-v26.3.1
Operating System: Windows

Post by zuill » Mon Apr 05, 2021 5:34 pm

When the Handwritten Font is chosen in the Wizard, the Expressions needed are included. That's why I asked to see the file in question. Seeing that could put this to rest pretty quickly.

Zuill
Windows 10, Finale 2011-v26.3.1
"When all is said and done, more is said than done."

User avatar
motet
Posts: 8225
Joined: Tue Dec 06, 2016 8:33 pm
Finale Version: 2014.5,2011,2005,27
Operating System: Windows

Post by motet » Mon Apr 05, 2021 5:36 pm

The list of Maestro tempo marks in the category have not changed since at least 2011.

None of the marks that have a metronome value take advantage of "Match playback to metronome marking text" and they really should. I think the marks predate that feature. Seems like it would have been good to switch to that when the feature was introduced.

I notice also that the metric modulation marks have no playback effect, though the absence of the "(no playback effect)" that you see in the others sort of implies that they do. I guess those are rarely used, but I wonder if that's caused confusion.

User avatar
zuill
Posts: 4418
Joined: Sat Dec 10, 2016 9:35 pm
Finale Version: Finale 2011-v26.3.1
Operating System: Windows

Post by zuill » Mon Apr 05, 2021 5:40 pm

In the Maestro Font default file, the Swing Expression does have playback set to Swing at 100. There is no Straight Expression, but that takes 5 seconds to create. Once the Score List is set correctly, playback should be fine.

Zuill
Windows 10, Finale 2011-v26.3.1
"When all is said and done, more is said than done."

User avatar
motet
Posts: 8225
Joined: Tue Dec 06, 2016 8:33 pm
Finale Version: 2014.5,2011,2005,27
Operating System: Windows

Post by motet » Mon Apr 05, 2021 5:46 pm

I suggested the "straight eighths" solution above, so I'm not sure whether he ignored that or somehow didn't get it to work.

If I were doing this, I think I'd make a separate "Swing" category for swing and straight marks with an all-staves sfaff list, and make those marks playback-only, i.e. no displayed text, and use an additional, normal mark for the text, with no playback effect.

User avatar
zuill
Posts: 4418
Joined: Sat Dec 10, 2016 9:35 pm
Finale Version: Finale 2011-v26.3.1
Operating System: Windows

Post by zuill » Mon Apr 05, 2021 6:00 pm

motet wrote:
Mon Apr 05, 2021 5:46 pm
I suggested the "straight eighths" solution above, so I'm not sure whether he ignored that or somehow didn't get it to work.

If I were doing this, I think I'd make a separate "Swing" category for swing and straight marks with an all-staves sfaff list, and make those marks playback-only, i.e. no displayed text, and use an additional, normal mark for the text, with no playback effect.
Since you are only checking the staves for Parts, and they will show anyway on the top staff only in the score, there's probably not a need for a separate category. Funny that MakeMusic acknowledged the bug years ago but still haven't fixed it. Then again, that is their MO for bugs.

Zuill
Windows 10, Finale 2011-v26.3.1
"When all is said and done, more is said than done."

User avatar
motet
Posts: 8225
Joined: Tue Dec 06, 2016 8:33 pm
Finale Version: 2014.5,2011,2005,27
Operating System: Windows

Post by motet » Mon Apr 05, 2021 6:29 pm

Do you mean checking "all staves" for parts affects score playback?

User avatar
zuill
Posts: 4418
Joined: Sat Dec 10, 2016 9:35 pm
Finale Version: Finale 2011-v26.3.1
Operating System: Windows

Post by zuill » Mon Apr 05, 2021 6:35 pm

Absolutely. This is a known bug, and I believe MM added a KB article about it, based on my findings (I think it was my discovery). Maybe it was Peter. It was some time back.

Zuill
Windows 10, Finale 2011-v26.3.1
"When all is said and done, more is said than done."

User avatar
zuill
Posts: 4418
Joined: Sat Dec 10, 2016 9:35 pm
Finale Version: Finale 2011-v26.3.1
Operating System: Windows

Post by zuill » Mon Apr 05, 2021 6:46 pm

Funny thing. I just looked in the KB and the first article that shows up is the workaround that is much more cumbersome, involving creating an expression in Misc category, applying them to all staves, and them hiding them. As I recall, that was the first workaround suggested to MM, but the better one is the Score List solution.

Zuill

P.S.: I can't find any documentation that I reported this to MakeMusic, so maybe my recall is fuzzy. Here's a thread from the old MM forum: https://forum.makemusic.com/default.aspx?f=5&m=457617

P.P.S.: And an even earlier thread where i suggested applying the hidden expressions to all staves, which is the workaround in the MM KB article: https://forum.makemusic.com/default.aspx?f=6&m=374647
Windows 10, Finale 2011-v26.3.1
"When all is said and done, more is said than done."

User avatar
zuill
Posts: 4418
Joined: Sat Dec 10, 2016 9:35 pm
Finale Version: Finale 2011-v26.3.1
Operating System: Windows

Post by zuill » Mon Apr 05, 2021 7:27 pm

Another old thread from 10 years ago: https://forum.makemusic.com/default.aspx?f=5&m=336435

Zuill
Windows 10, Finale 2011-v26.3.1
"When all is said and done, more is said than done."

User avatar
motet
Posts: 8225
Joined: Tue Dec 06, 2016 8:33 pm
Finale Version: 2014.5,2011,2005,27
Operating System: Windows

Post by motet » Tue Apr 06, 2021 12:09 am

How the heck did you ever discover the Staff List solution? Seems counter-intuitive!

User avatar
zuill
Posts: 4418
Joined: Sat Dec 10, 2016 9:35 pm
Finale Version: Finale 2011-v26.3.1
Operating System: Windows

Post by zuill » Tue Apr 06, 2021 1:45 am

As I said, I am not sure I was the one who discovered it. I thought I was.

What I recall is that I had discovered that when I was in the linked parts, all the staves would swing. That caused me to guess that the expression needed to be applied to all staves, so my first workaround was the misc. category hidden expressions workaround. Then, I thought maybe applying them manually to the parts in the Score List would accomplish the result needed when in the score.

So, I recall going through this thought process. However, there's always a chance someone else had discovered this and I just picked up on it. 10 years is a long time.

Zuill
Windows 10, Finale 2011-v26.3.1
"When all is said and done, more is said than done."

kmoffit
Posts: 1
Joined: Wed May 25, 2022 9:13 pm
Finale Version: 27
Operating System: Mac

Post by kmoffit » Wed May 25, 2022 9:30 pm

Instead of using/creating a Tempo Mark for this it's far easier to create or edit a Technique Text expression. In my case I copied the straight eighth notes tempo marking and moved it to the technique text section. Set playback to swing THEN set the the value to 4 zeros. Once you hit okay, Finale will reset the value to a single zero but playback will be straight.

Understand that I tried doing this with the Tempo Marks and Expressive Text settings and even setting playback as above produced no change in how the file played back. The beauty of my method is that you can choose to only mark certain parts/sections or an entire score.

Questions? Hit me up!

KM

oldmkvi
Posts: 384
Joined: Sat Feb 11, 2017 6:13 pm
Finale Version: 25
Operating System: Mac

Post by oldmkvi » Fri May 27, 2022 2:16 pm

I use Measure Expressions.
No muss, no fuss.

Post Reply